Nissan NV200
or Similar Fullsize
5 seats
5 doors
4 luggages
Automatic
A/C
Getting started
At Europcar we strive to make your car or van hire experience as simple as possible. Here we have put together various topics of useful information, advice and help related to your electric vehicle hire.
Step 1
Step 2
Step 3
Take the vehicle's key.
Press the button with the unlocked padlock symbol.
The vehicle is now unlocked; you can open the doors.
Step 1
Step 2
Step 3
Insert the key in the port and turn it on or if available you can also use the keyless start and simply press the start button which is located behind the steering wheel on the right.
As this is an electric vehicle, do not be surprised by the absence of noise. An alert message will indicate if the vehicle is not ready to drive.
Press the brake pedal and select 'Drive' (D) with the gear selector to begin driving. The gear selector is located on the center console.
Step 1
Step 2
Step 3
Press the brake pedal and select ""Drive"" (D) using the gear selector.
Remove your foot from the brake pedal; the vehicle will start to move slowly without making any engine noise since it is an electric vehicle.
Drive the electric vehicle as you would with a traditional automatic car, using the accelerator pedal to accelerate and the brake pedal to decelerate or stop.
Step 1
Step 2
Step 3
When you are in a safe and appropriate parking spot, keep your foot on the brake and put the vehicle in "Park" or "P" mode using the gear selector. Stop the vehicle by turning the key and removing it or if the keyless start is available simply press the start button.
Exit the vehicle and ensure that all doors are properly closed.
Press the button on the remote control to lock the vehicle.
Step 1
Step 2
Step 3
The charging port on the Nissan MV200 is on the front of the vehicle under the nissan logo. To open the charging port cover, ensure the vehicle is unlocked, press the charging port door, and release it - the door will open to reveal the sealed cover of the socket. Remove the socket cover to expose the combined charging port.
Before starting the charge, ensure that the vehicle's power system is turned off. To begin charging, insert the connector into the charging port and lock the vehicle using the key fob.
Disconnect and go
When charging is complete, unlock the vehicle, gently pull the connector to remove it, and place it back on its docking station. You can stop the charging at any time by disconnecting the charging cable.
Electric route planner
Enjoy peace of mind with your travel planning. Calculate the ideal route and charging stops according to your vehicle and preferences.
Frequently Asked Questions
Make the most of your trip! Find answers to the most commonly asked questions about electric vehicles.
- Am I entitled to a free upgrade?
- An amount of 30€ was debited from my credit card, which I cannot assign. Whom can I contact?
- Are electric vehicles more environmentally friendly than gasoline or diesel vehicles?
